Divus TOUCHZONE TZ07 User Manual page 36

The checkbox permits to enable / disable the control.
The 3 dimming steps permit to create different time scheduling. Each dimming step works in the same way; if the
instant of time configured on the left is reached, the brightness will be set to the value of the corresponding
slider.
When changing the slider values, the display brightness will be actively changed, in order to give you a preview
of the brightness value that should be set.
For a correct functionality, all dimming steps must be correctly configured.
Per default this option is disabled. When enabling e.g.
timeout and path to the image, check out the screenshot on the upper right) are shown.
The selected image (or a default image, if no image is selected) after the defined timeout will just be shown in
front of the launcher and prevent an unwanted commanding of the fields of the launcher. A swipe gesture to the
left or right side will disable the lock screen and show the launcher pages again.
The additional entries permit to show also the current time within the lockscreen or to protect the lockscreen
through a freely selectable password. In this way the lockscreen can protect the whole device against unwanted
operation (can be useful if the device is installed in public places).
option is very similar to
time each single picture should be displayed before changing to the next one.
The
TOUCHZONE. By enabling this option it is possible to place functions of the OPTIMA visualisation directly on the
lock screen and consequently command them without any delay, or to control the digital outputs of the TZ. There
are available 3 types of templates:
-
Template (web)
-
Template (native)
-
Template (GPIO)
elect the target folder containing the pictures that should be
DIVUS TOUCHZONE .
36