Divus TOUCHZONE TZ07 User Manual page 46

already described for the DIVUS LAUNCHER
show as well the password dialog as also the settings page:
The following list explains the single parameters that can be configured:
Setting
IP Address
SSL Protection
Port
Username
Password
Logs
Automatic reconnect
the correct password must be inserted. The following screenshots
Description
In this field the IP address of the targeted KNXCONTROL device must be entered.
Take care, the web app supports only KNXCONTROL devices with the new OPTIMA
interface.
A click on this entry will start a scanning process, which will show a list of the
KNXCONTROL devices found in the current network. Afterwards you can select the
desired IP address simply by choosing it from the list. Naturally it is still possible to
input the IP address manually.
This checkbox enables / disables the SSL protection of the server connection.
Generally in local networks there is no need for SSL protection. Therefore this
option is disabled per default.
Depending on the previous setting, the default port is either 443 (SSL enabled) or
80 (SSL disabled). If the connected server has a special network configuration (e.g.
uses port forwarding) and is reachable only through another port, the
corresponding port can be set here. If you are using a standard version of the
server you can just use the default values already set for this field.
This value refers to the user name the app should use to login to the KNXCONTROL
device. This user name must be present in the configuration of the server and
dispose of the necessary permissions to access the visualisation. If this criterion is
fulfilled, the user name can be inserted in this field and
password in the next setting
server. If this field is left empty, the app will show an extra login window, where
the authentication to the server has to take place.
The password which is required
above in order to correctly login to the server.
A sub-menu containing various options about the application logging, especially
useful in case of support.
When enabled, the app will automatically reload its contents whenever a network
change is revealed.
in combination with the
will cause the app to automatically login to the
in combination with the user name explained
DIVUS TOUCHZONE .
46