Divus TOUCHZONE TZ07 User Manual page 48

ATTENTION! When using the app on devices without permanent power connection (like for example smartphones
or tablets), the constant connection to the server can reduce battery life. Therefore it is possible to terminate the
app and its service at any time through the notification bar of Android (please check out the following two
screenshots).
Additionally to the app itself, also a dedicated widget for DIVUS OPTIMA exists. The widget can be created multiple
times and each widget can be used to control an object inside KNXCONTROL. To use the widget, the user has to
select it from the list of available widgets and configure it accordingly.
The widget configuration screen can be scrolled vertically and the following parameters can be configured:
Setting
IP address
KNXCONTROL
ID KNX object
KNX object action
ID KNX stop object
Label
Icon
Look & feel
Description
The IP address of the targeted KNXCONTROL device.
The ID of the object inside KNXCONTROL to control through the widget.
Which actions should be performed on the selected object through the widget.
According to which action is selected, the widget will have 2 buttons (off-on) or 3
buttons (off-stop-on).
The ID of the (complex) object inside KNXCONTROL, which is able to handle a stop
command.
The text which will be shown on the widget, as a custom description for the
controlled object or performed action (e.g. blinds living room, garage, garden
irrigation, all lights)
An icon from a predefined list can be chosen, which will be shown on the widget.
This option will define the colours and theme used in the widget.
DIVUS TOUCHZONE .
48