Rear Panel - Planet WGSD-1020 User Manual

1000Base-T
LNK/ACT
LED Color
LNK / ACT Green Lit: indicate the link through that port is successfully
established.
Blink: indicate that the switch is actively sending or
receiving data over that port.
1000/100
LED Color
1000 Orange Lit: indicate that connection made through the
corresponding port is running at 1000Mbps.
Lit: indicate that connection made through the
100 Green
corresponding port is running at 100Mbps.
FDX
LED Color
FDX Green Lit: indicate that the connection made through the
corresponding port is running in Full Duplex mode.
Blink: indicate that the connection is experiencing
collisions

2.2 Rear Panel

The rear panel of the Switch indicates an AC inlet power socket, which accepts input power from 100 to
240VAC, 50-60Hz.
Console
9600, N, 8, 1
Power Notice:
1. The device is a power-required device, it means, it will not work till it is powered. If your networks
should active all the time, please consider using UPS (Uninterrupted Power Supply) for your device. It
will prevent you from network data loss or network downtime.
2. In some area, installing a surge suppression device may also help to protect your switch from being
damaged by unregulated surge or current to the Switch or the power adapter.
Function
Function
Function
Figure 2: WGSD-1020 Switch rear panel
100-240V AC
50/60 H z
- 4 -