Planet WGSD-1020 User Manual page 43

Figure 4-59 Add SNMP Community name save successfully screen
3. Press any key for return to the previous menu.
4.3.3.2.3 Trap Managers
Allow adding Trap Managers.
Setup procedure:
1. Press "Add" to enter into "Trap Managers" screen, then press "Edit" for input IP address and
Community name.
2. After setup completed, press" Ctrl-A" to "Action menu" and choose "save" to save the current
configure. The screen in
Figure 4-60 Add SNMP Community name screen
Figure 4-61 appears.
- 39 -