Planet WGSD-1020 User Manual page 23

Figure 4-19 Port & Trunking Configuration save successfully screen
4.3.2.3 Port Sniffer Configuration
From the Switch Static Configuration sub-screen
Configuration and press enter. The Port Sniffer Configuration screen in
Press "Edit" to configure the Port Sniffer function.
Roving Analysis: provide disable or enable port sniffer function.
Analysis Port: allow seeing all monitor port traffic; you can connect sniffer port to LAN Explorer,
Session Wall, Sniffer Pro or Netxray.
Monitor port: choose one specific port for monitor the traffic of RX and TX or both (RX and TX) of
Analysis port
After setup completed, press "ctrl-A" and choose "save" to save the current configuration.
(see Figure
Figure 4-20 Port Sniffer Configuration screen
4-9), highlight Port Sniffer
Figure 4-20 appears.
- 19 -