Console Interface; Connect To Pc - Planet WGSD-1020 User Manual

4.1 CONNECT TO PC

RS-232 serial cable
Use the bundled RS-232 serial cable and attach the 9-pin female connector to the male connector on the
switch. Plug the other side of this cable to your PC.
Hyper Terminal
In Windows 95/98/2000/XP, launch "HyperTerminal", create a new connection, and adjust settings as
below:
§
Emulation: VT-100 compatible
§
Baud per second: 9600
§
Data bits: 8
§
Parity: None
§
Stop bits: 1
§
Flow Control: None
To gain a demo, please see the Figure 4-1.
Figure 4-1 Port Settings for console interface

4. CONSOLE INTERFACE

- 9 -