Planet WGSD-1020 User Manual page 22

4.3.2.2 Port & Trunking Configuration
From the Switch Static Configuration sub-screen
and press enter. The Port Trunk Configuration screen in
Press " Edit" to configure the trunk group. After setup completed, press "ctrl-A" to save the current
configuration. The following screen in
Figure 4-17 Port & Trunking Configuration screen
Figure 4-18
Figure 4-18 Save Port & Trunking Configuration process screen
(see Figure 4-9), highlight Port Trunk Configuration
Figure 4-17 appears.
and 4-19 appears.
- 18 -