Reset To Default; Reboot System - Planet VC-412 User Manual

Intelligent ethernet over vdsl switch

Table of Contents

VC-412 User's Manual

Note: Packet throughput is polled every 6 seconds.

4.5 Reset To Default

At the Main menu, you have the options to reset the VC-412 to its factory default settings.

The Reset option will reset ALL settings back to factory default; IP Addresses, Gateway

Address, Subnet Address, Auto Refresh Time, and any other commands issued to the

VC-412 will be lost by the reset. Use this option only when there is a malfunction of the

unit that prohibits it from functioning correctly after a reboot or power cycling.

The Reboot System command is used to reboot the OS but does not reset or change any

settings of the VC-412 and its firmware. On some occasions you will have to reboot the

firmware. The

may function improperly after major changes, use the reboot function

VC-412

to refresh the

with the new settings.

VC-412

Table of Contents