Table of Contents
Advertisement
3. WEB CONFIGURATION
3.1 Web configuration setup
Configuration through Web browser interface is a fast and convenient way. Although
this is an easy method, you do not have the full flexibility and control granted as you
would under Telnet or Console. The HTTP interface allows basic functions, such as Reset
Unit Counters. However, we recommend users to perform modifications through Console
or Telnet interfaces. The Web browser interface also allows VDSL ports and Ethernet
(trunk) ports monitoring, providing feedback on network statuses.
To log on to the VC-412 via HTTP you must first provide the IP address to the VC-412.
The IP address should have been set earlier in the Console setup section. If your IP has
not been set, please refer to the Console port section or the Defaults section in the
Appendix A.
Note: Please use MS Internet Explorer 5.5 or above to access to the VDSL Web page.
A. Launch your Web browser.
B. Enter the corresponding VDSL Managerial Switch IP Address in the address
field and press Enter.
C. You will be able to select your language preferences in the upper-right corner.
Selections are: English, Traditional Chinese, Simplified Chinese and
Japanese respectively.
D. Press the Become Administrator button if you want to access to administrator
options.
VC-412 User's Manual
10
Advertisement
Table of Contents
