Table of Contents
Advertisement
VC-412 User's Manual
3.4.2 SNMP Access Table
Under SNMP Access Table and SNMP Trap Receiver Table options, you can set IP
addresses that will be enter into SNMP database relating to the functionality and status of
the
. You can grant or deny accesses to a single PC or an entire subnet by entering
VC-412
the appropriate IP address. To utilize this feature, you must have a workstation with
SNMP client access and protocols installed. The VC-412 has been tested with HP
OpenView® and Windows NT® SNMP client services, and should be also compatible
with most other SNMP client software. However, we do not recommend users to use
Silvercreek SNMP client, it has been found that it sometimes causes problem to the
firmware.
The SNMP Access Table specifies addresses In-Band or Out-of-Band of your network
that will have the ability to issue SNMP commands to the VC-412. Setting these IP
addresses and passwords will ensure only authorized SNMP clients can issue
commands to the VC-412.
16
Advertisement
Table of Contents
