Table of Contents
Advertisement
3.4.3 SNMP Trap Receiver Table
The SNMP Trap Receiver Table is a set of user-defined addresses that belonged to the
SNMP Trap server.
VC-412 will send out SNMP information to the trap clients. Currently the VC-412 offers 6
Trap Conditions in addition to port information and counters. The 6 trap conditions are:
1.
Unit Up (Power On and Check Status OK)
2.
Unit Down (Error or Power Off)
3.
Port Link Up (RJ-11 Plugged-in and Link LED is On)
4.
Port Link Down (RJ-11 is not plugged and Link LED is Off)
5.
Trunk Port Up (RJ-45 is linked and Link/ACT LED is On)
6.
Trunk Port Down (RJ-45 is not linked and Link/ACT LED is Off)
When enabled (entered addresses, 4 receivers maximum) the
VC-412 User's Manual
17
Advertisement
Table of Contents
