PREPARING FOR INSTALLATION
Clean refrigerator surface using a mild dish detergent solution. Dry
thoroughly to avoid water spots.
• Wash refrigerator exterior with a clean, soft cloth or sponge and
a mild detergent in warm water. Rinse surface with clean, warm
water. (NOTE: If your refrigerator is stainless steel, always wipe
in the direction of the grain to avoid cross-grain scratching.)
You will need two adjustable wrenches and one pair of pliers
You will need a towel and a bucket for excess water.
There are two tubes attached to your Water Dispenser. The house line
connects to your house's cold water supply. If you have an ice maker, the
dispenser's refrigerator line connects to your refrigerator. You will need to
remove the cap from the end of the tube to connect it to your refrigerator.
MAGNETIC TUBE HOLDER