Download Print this page

Whirlpool EveryDrop EDRD101G1W Use & Care Manual page 12

Hide thumbs

Advertisement

CARE—HOW TO CHANGE THE FILTER
1
UNLOCK
To change the filter, turn
the Filter Lock/Unlock Knob
on the side of the unit so that
the knob is pointing to the
unlock icon.
22
2
OPEN FILTER ACCESS DOOR
Open the Filter Access Door
on the top of the dispenser.
3
PULL OUT OLD FILTER
Pull out the old filter. It's normal
for some water to be expelled
from the filter or leak from the
housing when a filter is removed
or inserted. Make sure the
Drip Tray is closed to catch
most of this water. Once you've
removed the filter, pull out the
Drip Tray to clean out any water
it may have caught.
NOTE:
Old filters can be sent back to EveryDrop™
to be recycled. New filters can be
purchased by calling 1.800.442.9991
(Monday–Friday, 8am–8pm ET), through
our website (everydropwater.com), or at
any certified dealer.
4
INSERT NEW FILTER
Remove the cap from the top
of the Replacement Filter and
insert the filter into the Filter
Access Door. Close the door and
turn the Filter Lock/Unlock Knob
to the lock icon.
NOTE:
Before locking the Filter Lock/Unlock
Knob, push the Filter Access Door down
until you hear it snap into place. This
ensures the door is closed.
23

Advertisement

loading

  Related Manuals for Whirlpool EveryDrop EDRD101G1W