Download Print this page

Whirlpool EveryDrop EDRD101G1W Use & Care Manual page 6

Advertisement

INSTALLATION
1
MOVE AND UNPLUG REFRIGERATOR
Slide the refrigerator out so
you can access the water
connections behind it. Then,
unplug the refrigerator
power cord.
NOTE:
Your refrigerator is heavy. When moving
the refrigerator for cleaning or service,
be sure to cover the floor with cardboard
or hardboard to avoid floor damage.
Always pull the refrigerator straight out
when moving it. Do not wiggle or "walk"
the refrigerator when trying to move it,
as floor damage could occur.
10
Excessive Weight Hazard
Use two or more people to
move and install refrigerator.
Failure to do so can result in
back or other injury.
Electrical Shock Hazard
Disconnect power
before servicing.
Replace all parts and panels
before operating.
Failure to follow these
instructions can result in
death or electrical shock.
2
SHUT OFF WATER
OFF
If your refrigerator does not
have an ice maker, skip ahead
to step 5.
If your refrigerator does
have an ice maker, find
the water shut-off valve
for your house's water line
and turn off your water.
IMPORTANT: Turn the water
back on before plugging your
refrigerator back in.
3
DISCONNECT WATER LINE
Disconnect the water line
that is running between your
refrigerator and the house at
the refrigerator end.
11

Hide quick links:

Advertisement

loading
Need help?

Need help?

Do you have a question about the EveryDrop EDRD101G1W and is the answer not in the manual?

Subscribe to Our Youtube Channel

Save PDF