Whirlpool EveryDrop EDRD101G1W Use & Care Manual page 7

INSTALLATION
4
EMPTY WATER LINE
Empty any excess water that
may be in the water line tube
into a bucket.
12
5
MOUNT DISPENSER
BACK OF
WATER DISPENSER
Route the dispenser's tubing
through the prongs on the
back of the unit and place the
dispenser on the front or side
of your refrigerator with its
integrated magnets. If hanging
on the front, mount the
dispenser 2–3 inches from the
hinge side to allow the tubing
to move freely within the
Tubing Holders on the side.
6
MOUNT TUBING
Mount the two Tubing Holders
to the side of the refrigerator
and run the tubing through
the holder—do this prior to
making any water connections.
Mount the holders 2–3 inches from
the front and back of refrigerator.
13