Engine Oil Strainer Screen; Cam Chain Tension - Honda XR80R Service Manual

Check that t he sea ling w ashe r on the drain bolt is in
good CO lldit ion, replace it necessary.
Install and tigh ten the drain bolt.
TORQUE: 2S N.m 12.5 kgf.m , 18 lbf.ft )
Fi ll the crankcase w it h Ihe recom m ended engi ne oil.
Oil CA PACITV:
XR100R: 0.911 (0.95 us qt. 0.79 Imp
qt)
XR80R : 0.8
t
(0.85 us qt, 0.70 Imp qt )
Install the oil filler cap/dipstic k.
Sl art the en gine and let it idle for 2 to 3 minutes.
Stop the engine and rocheck t he oil level.
Make sure there are no oil leaks.
ENGINE OIL STRAINER SCREEN
Perlorm tNs
Remove the right crankcase cover (p age 9·3).
maintenance
IJefore filling /he
Remove the oil stra in er screen and clean it.
er>glne with oil.
Re in stall the oil strainer screen and right crankcase
cove r (page 9·12).
Fill I he cran kcase w ith recommended engine oil
(page 3·12).
CAM CHAIN TENSION
Start Ihe engine and Ie! it idle.
Loosen the cam chain adjuster set plate bolt and
turn the cam chain adjuste r in either di rection. When
chain noise in minimiled. t ighten the set plate bolt
If the cam chain is st ill noisy w ith the pu nch mark
at
the "S " position. tighte n the set p late bolt. stop the
eng in e and proceed w ith I he fo llowing steps.
MAINTENANCE
D'~ A ~ ' N ~ :""~' - ' NG
WASHER
sn'A"'"
SC RE EN
3-13