Engine Oil Strainer Screen - Honda ACTIVA 4G 2017 Owner's Manual

ENGINE OIL STRAINER SCREEN

1. To drain the oil, remove the oil filler
cap/ dipstick, oil drain bolt and sealing
washer (page 45).
2. Remove the oil strainer screen cap (1),
spring (2), oil strainer screen (3) and
O-ring (4).
3. Clean the oil strainer screen.
4. Check that the oil strainer screen,
sealing rubber and O-ring are in good
condition.
(1)
(2)
(1) Oil strainer screen cap ¼vkW ; y LVª s a u j LØhu dS i ½
(2) Spring ¼fLiz a x ½
(3) Oil strainer screen ¼vkW ; y LVª s a u j LØhu½
(4) O-ring ¼O&fja x ½
46
ACTIVA 4G
(3)
(4)
5. Install the oil strainer screen spring,
O-ring and oil strainer screen cap.
Oil Strainer Screen Cap Torque:
20 N.m (2.0 kgf.m, 14 Ibf.ft)
6. Fill the crankcase with the recommended
grade oil;
0.8L (0.8 US qt, 0.7 Imp qt)
7. Reinstall the oil filler cap/dipstick.
8. Start the engine and let it idle for 3-5
minutes.
9. Stop the engine and wait for 2-3
minutes. Check that the oil level is at
the upper level mark on the oil filler
cap/dipstick with the vehicle upright on
firm, level ground. Make sure that there
are no oil leaks.
Honda Motorcycle & Scooter India Pvt. Ltd.