Handlebar Installation - Honda XR80R Service Manual

FRONT WHEEL/ BRAKE/SUSPENSION/STEERING
11-4
Remove the t hroUie housing screws.
Disconnect the throttle cable end from the throttle
pipe arid remove the housing.
Remove the thlOtt le pipe from the han dlebar.
Remove the screws, holder and brake leve r brackeT.
Remove the handlebar upper ho lder bolts and TS
hOlder.
Remove the handlebar.
INSTALLATION
Place the handlebar onto the lower holders, aligning
the pu n Ch ma rks on the handleba r with the top
surface 01 the lower holder.
Install the upper ho lders with thei r punCh marks
faci ng forwa rd .
Install the holder bo lts.
Tighten the forwa rd bo lts first, then the rear bolts.
THROTTLE HOU'}NG COVER
THROTIlE CABLE END
THROTTLE PIPE
PUNCH MAI,"S