Screen Rotation; Sounds; User Accounts - Honeywell Thor VM3 User Manual

Screen Rotation

Start > Control Panel > Screen Rotation (Classic view)
The Screen Rotation panel provides options for rotating the display:
0 Degree - Returns screen to the default orientation.
90 Degree - Rotates the screen counter clockwise 90 degrees as compared to the default orientation.
180 Degree - Rotates the screen 180 degrees as compared to the default orientation.
270 Degree - Rotates the screen counter clockwise 270 degrees as compared to the default orientation.
Select the desired rotation and tap OK. The screen may briefly go blank during the rotation process.
Tap Close to dismiss the panel and keep the current screen rotation.

Sounds

Start > Control Panel > Sounds and Audio Devices (Classic View)
Start > Control Panel > Sounds, Speech and Audio Devices (Category View)
Use the slider bar to adjust the volume level as desired.
Alternatively:
• Tap the Volume icon, if present, in the taskbar and move the slider until the volume level is as desired.

User Accounts

Note: The following applies to a Thor VM3 that is not part of a domain. When the Thor VM3 is part of a domain, the user
is prompted for credentials at Windows startup or log on.
The Thor VM3 is pre-configured with an administrator account named Administrator. By default, the Thor VM3 automati-
cally logs onto the Administrator account at Windows startup.
If the user assigns a password to the Administrator account:
• The password is stored and used when the Thor VM3 logs onto the Administrator account at Windows startup. The user
is not prompted to enter a password.
• If the user logs off, the password must be manually entered to log back onto the Thor VM3.
• At the logon prompt, the user could specify a different user account (and password, if necessary) to log on, assuming the
account has been added to the Thor VM3.
2 - 22