Dock I/O Pin Cover; Padlock; Laptop Security Cable - Honeywell Thor VM3 User Manual

Dock I/O Pin Cover.

Padlock

Laptop Security Cable

The dock contains a tethered I/O Pin Cover to protect the I/O pins on the dock when
a Thor VM3 is not mounted in the dock.
• When the Thor VM3 is not installed in the dock, use the I/O Pin Cover to protect
the pins on the dock as shown.
• When a Thor VM3 is installed in the dock, the I/O Pin Cover can be placed out of
the way behind the dock.
It may be desirable to secure the Thor VM3 in the dock so it cannot
be removed from the dock. The quick release handle on the Thor
VM3 is notched to allow a user supplied standard padlock to be
placed through a hole in the bracket on the back of the Thor VM3 in
the location shown below. Once the padlock is installed, the release
handle cannot be moved so the Thor VM3 cannot be removed from
the dock. The padlock shackle must be smaller than 3/16" (4.76mm).
A cable tie wrap can be used instead of a padlock if desired.
The Thor VM3 can be secured with a standard laptop security ca-
ble using the slot on the back of the Thor VM3.
1 - 17