Bios; Accessing The Bios Setup; Boot Order; Exiting Bios Setup - Honeywell Thor VM3 User Manual

Hide thumbs Also See for Thor VM3:
Table of Contents

Advertisement

BIOS

The Microsoft Windows operating system is installed before shipping. The default BIOS parameters are configured at that time.
In most cases, it is unnecessary to modify the BIOS parameters.
Generally, it is only necessary to enter the BIOS setup to change the boot order of the drives.
This section is not intended to detail all features of the BIOS, instead it is intended to cover the most commonly used setup
options.
CAUTION - Be very careful when using this utility to modify BIOS Setup parameters. The Thor VM3 may generate unex-
pected results when incorrect or conflicting parameter values are entered. Selecting incorrect or invalid options may re-
quire the Thor VM3 to be returned for repairs.
The parameters should only be modified by Information Services personnel or the system administrator.

Accessing the BIOS Setup

When the Embedded BIOS screen (Phoenix Technologies) is displayed press the Del key to enter BIOS setup.
Use the arrow keys to move around the screen.
To access and modify the BIOS on the Thor VM3, an external keyboard must be attached.

Boot Order

To view or edit the boot order, select the Boot tab.
By default, the first device in the boot order is USB Hard Drive.
The second device is the Windows CE Image.
If a USB drive, such as a thumb drive is attached to the Thor VM3, the device attempts to boot from the USB drive:
• If the USB drive contains a bootable sector, the Thor VM3 boots from the USB drive.
• If the USB drive does not contain a bootable sector, the Thor VM3 does not boot. Remove the USB drive and boot
the Thor VM3 again.

Exiting BIOS Setup

To exit the BIOS setup, select the Exit tab and select one of these options:
• Save Setting and Restart
• Exit Setup without Saving Changes
• Reload Factory-Defaults and Restart

Thor VM3 Recovery DVD

A recovery DVD is available to restore the operating system on your Thor VM3 to the same state it had when it was shipped
from the factory. The recovery DVD may not reload all factory installed software.
Contact
Technical Assistance
software.
(page 6-1) for information on the recovery DVD and for assistance installing other factory loaded
2 - 25

Advertisement

Table of Contents
loading

Table of Contents