Honeywell Thor VM3 User Manual page 81

Option
Prompt if devices request
to pair
Continuous Search
Filtered Mode
Printer Port - COM9
Logging
Computer Friendly Name Default: Computer description (Control Panel > System > Computer Name tab).
Information
This option is Enabled by default.
A dialog box appears on the Thor VM3 screen notifying the user a Bluetooth device
requests to pair with the Thor VM3.
The requesting Bluetooth device does not need to have been Discovered by the Thor
VM3 before the pairing request is received.
Tap the Accept button or the Decline button to remove the dialog box from the screen.
In some cases, if a Bluetooth device is already paired this setting cannot be changed.
If this is the case, an error message is displayed and the option is not changed. The
Bluetooth device must be disconnected before changing this setting.
This option is Disabled by default.
When enabled, the Bluetooth connection never stops searching for a device it has
paired with when the connection is broken (such as the paired device entering Sus-
pend mode, going out of range or being turned off). When disabled, after being en-
abled, the Thor VM3 stops searching after 30 minutes.
This option is Enabled by default.
Determines whether the Bluetooth client discovers and displays all serial Bluetooth
devices in the vicinity (Filtered Mode is disabled/unchecked) or the discovery result
displays Bluetooth scanners and printers only (Filtered Mode is enabled/checked).
When Filtered Mode is disabled, the Thor VM3 can pair with up to four Bluetooth de-
vices.
A Restart is required every time Filtered Mode is toggled on and off.
When in non-filtered mode, the Thor VM3 supports SPP only.
This option is Disabled by default.
This option assigns Bluetooth printer connection to COM9 instead of COM19. To en-
able this option, Filtered Mode must be enabled.
This option is Disabled by default.
When logging is enabled, the Thor VM3 creates bt_log.txt and stores it in the C:/Pro-
gram Files\LXE\Bluetooth folder. Bluetooth activity logging is added to the text file as
activity progresses. A bt_log_bak.txt file contains the data stored by bt_log.txt prior
to reboot.
During a reboot process, the Thor VM3 renames bt_log.txt to bt_log_bak.txt. If a
file already exists with that name, the existing file is deleted, the new bt_log_bak.txt
file is added and a new bt_log.txt is created.
The name, or identifier, entered in this space by the System Administrator is used ex-
clusively by Bluetooth devices and during Bluetooth communication.
The Computer Description field is blank by default, so unless this field is modified be-
fore Bluetooth is installed, Computer Friendly Name is also blank, but can be edited
by the user.
2 - 9