Using Bluetooth; Bluetooth Devices Display - Before Discovering Devices; Initial Configuration; Subsequent Use - Honeywell Thor VM3 User Manual

Hide thumbs Also See for Thor VM3:

Table of Contents

Using Bluetooth

Start > Control Panel > Bluetooth or Bluetooth icon in taskbar or Bluetooth icon on desktop

Tap the Bluetooth icon in the taskbar to open the Bluetooth EZPair application.

The Thor VM3 default Bluetooth setting is Enabled.

The Thor VM3 Bluetooth

Prerequisite: The remote Bluetooth devices have been setup to allow them to be "Discovered" and "Connected/

Paired". The System Administrator is familiar with the pairing function of the remote Bluetooth devices.

Note: When Filtered Mode is enabled, only Bluetooth printers or Bluetooth scanners/imagers are recognized and

displayed in the Bluetooth panel. All other Bluetooth devices are ignored.

1. Select Start > Control Panel > Bluetooth or tap the Bluetooth icon in the taskbar or on the desktop.

2. Tap the Settings Tab.

3. Change the Computer Friendly Name at the bottom of the Settings display. The Bluetooth Thor VM3 default

name is the Computer Description. Honeywell strongly urges assigning every Thor VM3 a unique name (up

to 32 characters) before Bluetooth Discovery is initiated.

4. Check or uncheck the Thor VM3 Bluetooth options on the Settings tab.

5. Tap the OK button to save your changes or the X button to discard any changes.

Note: Taskbar and Bluetooth device Icon states change as Bluetooth devices are discovered, paired, connected

and disconnected. A taskbar Bluetooth icon with a red background indicates Bluetooth is active and not

paired with any device. A device icon with a red background indicates a disconnected paired device.

1. Tap the Bluetooth icon in the taskbar or on the desktop to open the Bluetooth EZPair application.

2. Tap the Bluetooth Devices tab.

3. Tap the Discover button. When the Bluetooth module begins searching for in-range Bluetooth devices, the

button name changes to Stop. Tap the Stop button to cancel the Discover function at any time.

4. The discovered devices are listed in the Bluetooth Devices window.

5. Highlight a Bluetooth device in the Discovered window and double-tap to open the device properties menu.

6. Tap Pair as Scanner to set up the Thor VM3 to receive scanner data.

2 - 12

module is designed to Discover and pair with nearby Bluetooth devices.

Table of Contents