Firewall - Planet 802.11g Wireless ADSL 2/2+ Router ADW-4401A/Bv2 User Manual

802.11g wireless adsl 2/2+ router
Table of Contents

Advertisement

RIP-1 is universally supported, but RIP-2 carries more information. RIP-1 is adequate
for most networks. Only consider RIP-2 if your network has unusual topology.
Both RIP-2B and RIP-2M sends the routing data in RIP-2 format. RIP-2B uses subnet
broadcasting while RIP-2M uses multicasting.
Direction: Select the RIP direction from None, Both, In Only and Out Only.
Multicast: IGMP (Internet Group Multicast Protocol) is a session-layer protocol used
to establish membership in a multicast group. The ADSL router supports both
IGMP-v1 and IGMP-v2. Select None to disable it. Please refer to
Internet
Multicast.
The only difference is the interface.

3.10.4 Firewall

Go to Advance Setup-> Firewall to set firewall rule.
User can enable or disable firewall feature of the ADSL router in the page.
55

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 802.11g Wireless ADSL 2/2+ Router ADW-4401A/Bv2 and is the answer not in the manual?

Table of Contents