Table of Contents
Advertisement
When you are done making changes, click on SAVE to save your changes or on BACK
to return to the previous screen.
3.10.1.3 IP Address Mapping
Go to Advanced Setup ->NAT -> Multiple ->IP Address mapping to set IP
Address mapping parameters.
The IP Address Mapping is for those VCs that with multiple IPs. The IP Address
Mapping rule is per-VC based. (only for Multiple IPs' VCs).
Rule Index: The Virtual server rule index for this VC. You can specify up to 10
rules. All the VCs with single IP will use the same Virtual Server rules.
Rule Type: There are 4 types of One-to-One,
Many-to-One, Many-to-Many
Overload,
51
Advertisement
Table of Contents
Need help?
Do you have a question about the 802.11g Wireless ADSL 2/2+ Router ADW-4401A/Bv2 and is the answer not in the manual?