Front panel LEDs and buttons
Item
Description
1
Power On/Standby button
2
System power LED
3
Internal health LED
4
External health LED
(power supply)
5
NIC 1 activity LED
6
UID LED
7
UID button
Status
—
Green = Power on
Amber = System shut down, but power still applied
Off = No power
Green = Normal
Amber = System degraded. To identify the component in a
degraded state, refer to system board LEDs (on page 66).
Red = System critical. To identify the component in a critical state,
refer to system board LEDs (on page 66).
Off = Normal (when in standby mode)
Green = Normal
Amber = Power redundancy failure
Red = Critical power supply failure
Green = Network link
Flashing = Network link and activity
Off = No link to network. If power is off, view status on the rear
panel RJ45 LEDs.
Blue = Activated
Flashing = System remotely managed
Off = Deactivated
—
Component identification 61