Rack Rails - HP ProLiant ML350 Maintenance And Service Manual

Remove the bezel.
4.
To replace the component, reverse the removal procedure.

Rack rails

NOTE: This procedure applies to rack servers only.
To remove the component:
Power down the server (on page 26).
1.
Remove the server from the rack (on page 27).
2.
Use a flat-head screwdriver to lift the spring tab.
3.
Slide the rail forward and remove it from the server.
4.
Repeat the steps above to remove the other rail.
5.
To replace the component, reverse the removal procedure.
Removal and replacement procedures 30