Full-height
•
To replace the component, reverse the removal procedure.
Heatsink
To remove the component:
Power down the server (on page 26).
1.
Do one of the following:
2.
Unlock and remove the bezel
•
Extend the server from the rack (on page 26).
•
Remove the access panel
3.
Disconnect the heatsink fan cable from the system board
4.
Open the heatsink locking levers.
5.
Remove the heatsink.
6.
("Front
bezel" on page 27).
("Access
panel" on page 29).
("System board
LEDs" on page 66).
Removal and replacement procedures 39