Operation; Maintenance - Fieldmann FZV 4001-E User Manual

EN 16 Machine assembly | Operation | Maintenance
Note: In case of use other than grass collection, the lawnmower can be used without the
grassbox attached but with the protective guard engaged.

7. OPERATION

Attach the Extension Cable
Attach the cable holder (A2) to the upper handle
Starting and Stopping
Attention! Make sure the cylinder stopped rotating before switching "on" again. Do not
rapidly switch off and on.
Starting:
Press and hold the safety button
Squeeze the switch lever 10 towards the handle (D)
Release the safety button
Stopping:
Release the switch lever 10

8. MAINTENANCE

Aerator Cleaning
Attention! Danger! The cylinder of the verticutter may cause serious injury!
Attention! Before any maintenance, disconnect the machine from the mains and wait until
the cylinder of the verticutter has stopped.
Attention! During maintenance, always wear work gloves. The verticutter should be
cleaned after each use.
Attention! Danger of injury and material damage.
Attention! Do not clean the verticutter under running water (particularly under high
pressure).
Attention! Do not clean the verticutter using hard or sharp-pointed objects.
Remove grass and mud from the wheels, cylinder of the verticutter and the guard.
(Fig. 3)
FZV 4001 E