Draytek Vigor2120n-plus User Manual page 374

Device Management
After finished the above settings, click OK to save the configuration.
F o r I P v
F o r I P v
Available settings are explained as follows:
Item
Management Access
Control
Access List
After finished the above settings, click OK to save the configuration.
Vigor2120 Series User's Guide
6
6
Client, you may still need to enable SSL 3.0 to make sure
you can connect, however, it's not recommended.
Check the box to enable the device management function
for Vigor2120 (series).
Respond to external device – If it is enabled, Vigor2120
(series) will be regarded as slave device. When the external
device (master device) sends request packet to Vigor2120
(series), Vigor2120 (series) would send back information to
respond the request coming from the external device which
is able to manage Vigor2120 (series).
Description
Allow management from the Internet - Enable the
checkbox to allow system administrators to login from the
Internet. There are several servers provided by the system
to allow you managing the router from Internet. Check the
box(es) to specify.
Enable PING from the Internet -
to enable all PING packets from the Internet. For security
issue, this function is disabled by default.
You could specify that the system administrator can only
login from a specific host or network defined in the list. A
maximum of three IPs/subnet masks is allowed.
IPv6 Address /Prefix Length- Indicate the IP address(es)
allowed to login to the router.
358
Check the checkbox