Table of Contents
Advertisement
On the side of Vigor2120 series which served as an AP, press WPS button once on the
front panel of the router or click Start PBC on web configuration interface. On the side
of a station with network card installed, press Start PBC button of network card.
If you want to use PIN code, you have to know the PIN code specified in wireless client.
Then provide the PIN code of the wireless client you wish to connect to the vigor router.
For WPS is supported in WPA-PSK or WPA2-PSK mode, if you do not choose such mode in
Wireless LAN>>Security, you will see the following message box.
Please click OK and go back Wireless LAN>>Security to choose WPA-PSK or WPA2-PSK
mode and access WPS again.
Vigor2120 Series User's Guide
304
- Quick Links:
- For Vigor2120N-Plus
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Vigor2120n-plus and is the answer not in the manual?
Questions and answers