Qi60 Switch Setting - Mitsubishi Electric QX10 User Manual

1 GENERAL SPECIFICATIONS OF INPUT AND OUTPUT MODULES AND
INSTRUCTIONS FOR SELECTING THEM

1.3.3 QI60 switch setting

Set the interrupt processing condition with switch 1. The relationships between bits and inputs are as indicated
below.
b15
X15 X14 X13
0: Leading edge, 1: Trailing edge
1 - 11
Set the QI60 switches in I/O assignment of PLC Parameter.
Choose [Interrupt] in Type, choose [Switch setting], choose [HEX.] in Input format, and
set the interrupt processing conditions in Switch 1.
Choose Interrupt.
Set the interrupt processing conditions
(leading edge/trailing edge) of CH1 to CH16.
X12 X11 X10 X9
Choose Switch setting.
Choose HEX.
Setting inhibited.
to
X8 X7 X6 X5
MELSEC-Q
X4 X3 X2 X1
b0
X0
1 - 11