Electrical Connection - Omcan PM-IT-0146 Instruction Manual

• Incorrect installation.
• Unsuitable electrical supply.
• Alterations or operations not authorised by the Manufacturer.
• Use of non genuine spares or not specific to the model.
CAUTION! If the power lead is damaged, it must be replaced by the manufacturer or Service Dept. or in
any case by similarly qualified persons to prevent any possible hazard.

ELECTRICAL CONNECTION

Before operating the machine, check that your home voltage is the one stated in the technical sheet of this
manual and that the system is earthed. Never use any other type of supply. The Manufacturer disclaims any
liability for damage to persons or property owing to the failure to follow this rule. Where necessary, use a plug
adapter, making sure that it is suitable for the supply lead.
WARNINGS
In the event of an emergency, to stop the machine, simply lift the safety guard (E), or press the switch (B) to
position "0". Do not tamper with or neutralise any protections your machine is fitted with. If you note that the
machine starts working also in conditions in which it ought not to (safety guard "E" up), switch it off immediately
pressing the switch (B) to position "0". Take the power lead plug (C) out of the socket and get in touch with your
Authorised Dealer (see guarantee coupon accompanying the machine). This machine is not a toy: during use
it must be kept under control and out of the reach of children. Do not use the machine with loose clothes or
aprons that might get caught in the turning rollers. Use the same precaution for hair, jewellery, etc. Place the
machine on a firm surface, able to bear its weight. Before using the machine make sure you know how to stop
it in an emergency.
Do not use the machine if:
• It is not working properly.
• It has been damaged or dropped.
• If the power lead or plug are damaged.
If the power lead is damaged it must be replaced by the Manufacturer or Service Dept. or in any case by
similarly qualified persons to prevent any possible hazard. Never put the power lead or plug in water. Also keep
them away from sources of heat. Do not allow the power lead to hang from tables or furniture.
Do not use the machine near sinks or wet surfaces.
1 YEAR PARTS AND LABOUR BENCH WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either
an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the
equipment.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
Safety and Warranty
5