If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be filled out within three days, from the delivery date shown in the shipping documents.
Si el paquete ha sufrido un manejo de poco cuidado, golpes o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro de las 24 horas, de modo que podamos iniciar una reclamación con la compañia.
Page 5
1 YEAR PARTS AND LABOR BENCH WARRANTY Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the equipment.
Installation The peeler must be installed on a flat, non-skid work surface. During peeling operation, the food product must be wet by means of 3/4” inlet pipe (Pic. 1, #1). An alternative is to place the machine below a 3/4” water faucet and let the water flow during the operation.
Operation IMPORTANT: BE SURE THE PLATE IS FIRMLY FITTED ONTO THE CENTRAL SHAFT PIN. First, check if the lid (Pic. 1, #4) is properly fitted on the top of the unit. To start the machine, toggle the switch (Pic. 1, #2) to the ON position. Let the water flow into the chamber and load it with food product. Water will then flow out through the waste outlet.
Page 11
24074.5 13442 30029 Pression Rivet AD-423-S for 13442 00045.0 30194 Reduction Bush for 13442 04626.4 27720 Omcan Logo (Machines) for 13442 27154.3 30216 Bearing 6004 Z Din 625 for 13442 00087.6 30275 Screw 6x20 for 13442 04679.5 38344 PFS M4x8 Din 933 Inox for 13442 28253.7...
Warranty Registration Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at the perforation and then send to the address specified below. You can also register online by visiting: Merci d’avoir acheté...
Page 16
Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers.
Need help?
Do you have a question about the PE-BR-0004 and is the answer not in the manual?
Questions and answers