Maintenance; Troubleshooting - Omcan PM-IT-0146 Instruction Manual

Maintenance

CLEANING
This is the only maintenance normally required. Before and after each time of use, make sure that plug is not
in the socket and that the switch is on "0". Thoroughly clean the machine and accessories with a dry cloth or
soft brush. Before use cleaning can be completed passing a piece of dough through the rollers, which should
then be eliminated. Do not use sharp objects to remove any remainders. Absolutely avoid using knives or other
utensils to put the dough between the machine rollers.
Never wash the machine and accessories with water or detergents.
Never wash any part of the machine and its accessories in a dishwasher.
Before stowing the machine and accessories make sure that all parts are perfectly dried.

Troubleshooting

PROBLEM
The motor fails to start or stops
suddenly.
If none of the above inconveniences are detected, contact your Authorised Dealer.
REFERENCE
Item Number Model Number
13234 PM-IT-0146
LIKELY CAUSE
Plug disconnected or incorrectly
plugged in.
Switch on "0".
Safety guard up.
Description
Pasta Sheeter 6" / 146mm Roller Width
2mm Thick 0.1 HP / 85W 120V/60/1 cULus
8
REMEDY
Plug in correctly.
Press the switch to "I".
Lower the safety guard.
Manufacturer Model Number
RM720