Table of Contents
Advertisement
Lights and visibility
Lights
Switching lights on and off
Switching on the side lights
– Turn the light switch
Switching on dipped headlights
– Turn the light switch to position
Switching off the lights
– Turn the light switch to position 0.
Safety First
Fig. 74 Detail of the dash
panel: Switch for lights,
fog lights and rear fog
light
⇒ fig. 74
to position
.
.
Handling instructions
Switching on the fog lights*
– Turn the control from position
lights control symbol
will light up.
Switching on the rear fog lights (vehicles with front fog lights)
– Turn the control from the position
⇒
. An indicator lights up in the instrument panel.
Switching on the rear fog lights (vehicles with no front fog lights)
– Turn the control from the position
lights up in the instrument panel.
WARNING
Never drive with just the side lights on. Risk of accident. The side lights are
not bright enough to illuminate the road ahead and to ensure that other
road users are able to see you. Always use your dipped headlights if it is
dark or if visibility is poor.
Note
•
The dipped beam headlights will only work with the ignition on. The side
lights come on automatically when the ignition is turned off.
•
If the lights are left on after the key has been taken out of the ignition lock,
a buzzer sounds when the driver door is opened. This is a reminder to switch
off the lights.
Tips and Maintenance
Lights and visibility
or
to the first stop. The
or
to the second stop
to the last stop. An indicator
Technical Data
109
Advertisement
Table of Contents
