Seat Leon 2005 Owner's Manual page 61

60 Cockpit
Displayed categories
The display in the instrument panel shows the mileage and
trip recorder as well as the selector lever position.
A
Control and warning lamps: "Control and warning lamps"
1
A
Clock: "Setting the time". In some vehicles the ambient temperature is
1
displayed to the right of the clock
A
There are optional and automatic displays in this field
2
- Optional displays: for example the Multi-Function Indicator and the
outside temperature
- Automatic displays: information or warning messages: "Information and
warning messages on the screen"
- The screen will also display menus with different information allowing
the execution of many adjustments: "Instrument panel menus"
A
Mileage display or Service Interval Display "Mileage display or Service
3
Interval Display"
A
Selector lever position display for the automatic gearbox. The actual
4
position of the selector lever or the gear which is engaged (for Tiptronic)
are highlighted
Mileage display or Service Interval Display
Distance display
The left-hand counter in the display registers the total distance covered by the
vehicle.
The right-hand counter registers the short journeys. The last digit indicates
steps of 100 metres. The trip recorder counter may be reset by the reset
button
Fig. 37 Digital display in
Service interval display
the instrument panel
A Service pre-warning will appear in the mileage displays if a service is due
soon. A "spanner" symbol appears and the display "km" with the distance
that can be driven until the next service appointment is due. The display will
change after approximately 10 seconds. A "clock symbol" appears and the
number of days until the service appointment should be carried out. The
following information is displayed in the instrument panel screen
... KM OR ... DAYS. The service message will disappear approximately 20
seconds after the ignition is switched on or the engine is running. The normal
display can be resumed by pressing the reset button on the trip counter or by
pressing the rocker switch of the MFI
With the ignition switched on, you can call up the current service message by
pressing the trip counter reset knob for 2 seconds.
4)
Depending on the model version
⇒ page 56, fig. 32
A
.
5
⇒ page 61, fig. 38
4)
: SERV. IN
A
.
B