Table of Contents
Advertisement
162
Driving
Setting speed*
– Press the lower part of the rocker switch once briefly when you
have reached the speed you wish to set, SET
When you release the rocker switch, the current speed is set and held
constant.
Adjusting set speed*
The speed can be altered without touching the accelerator or
the brake.
Fig. 124 Turn signal and
main beam lever: switch
and rocker switch for CCS
⇒ fig. 124
A
.
A
Setting a higher speed
– Press the upper part of the rocker switchRES
increase the speed. The vehicle will continue to accelerate for as
long as you keep the rocker switch pressed. When you release
the switch, the new speed is stored.
Setting a lower speed
– Press the lower part of the rocker switch SET-
speed. The vehicle will automatically reduce its speed for as long
as you keep the switch pressed. When you release the switch, the
new speed is stored.
Fig. 125 Turn signal and
main beam lever: switch
and rocker switch for CCS
⇒ fig. 125
A
to
A
A
to reduce the
A
Advertisement
Table of Contents
