Table of Contents
Advertisement
108
Opening and closing
Roll-back function of the sliding/tilting roof*
The sliding/tilting roof has a roll-back function which prevents larger objects
getting trapped when the roof is closed. The roll-back function does not
prevent fingers getting pinched against the roof opening. The sliding/tilting
sunroof stops and opens again immediately if it is obstructed when closing.
If the sliding/tilting roof has been opened again by the roll-back function, it
can be closed only by pressing the rotary button at the front in position
⇒ fig. 72
sunroof will now close without the roll-back function.
Operation in the event of a breakdown
In the event of a breakdown, the sunroof may be closed manually.
•
Remove the plastic cover by inserting a screwdriver in the rear section.
•
Remove the lever from the cover fastening, insert it in the opening as far
Fig. 72 Detail of the
as possible (pushing against the spring) and close the sliding roof.
sunroof: rotary button for
•
sliding/tilting sunroof
Fit the lever back into position.
Fig. 73 Emergency
closing handle
until the sliding/tilting roof has closed fully. Please note that the
A
A
Advertisement
Table of Contents
