Siemens SINUMERIK 828D Manual page 89

The following workpiece measuring versions are available:
Figure 13-1
Calibrating - length, radius in ring, radius at edge, calibration on a sphere, calibration in a
slot
Measuring edge - point/ surface, align edge, distance groove/web,
Measuring corner - right-angled corner with 3 points or any corner with 4 points,
internal/external
Measuring holes - over 4 or 3 points on a segment of a circle - rectangular pocket
Measuring spigots - over 4 or 3 points on a segment of a circle - rectangular pocket
3D measuring - align plane - sphere
Benefits
Reliable quality of the manufactured parts by automatic measurement in the machine
Fast programming for complex measuring tasks thanks to input screens with graphic
support
Measuring cycles are now also available for ShopMill sequence programs
SINUMERIK Operate - Milling
Control system overview for machine tools' sales people, 2017, A5E41992599B AA
In-process measurement
13.4 In-process measuring for workpiece and tool
CNC technology cycles
89