Exit Rollers; Sensor; Print Head Shaft - Pitney Bowes ADDRESSRIGHT DA750 Operator's Manual
Pitney bowes inc. all in one printer user manual
Hide thumbs
Also See for ADDRESSRIGHT DA750:
- Quick reference manual (2 pages) ,
- Operating manual (143 pages)
Table of Contents
Advertisement
Print Quality
Problems
(continued)
Exit Rollers
Sensor
Print Head Shaft
SV61027 Rev. D
•
Clean the print head cartridge: dampen a soft cotton
cloth with water and wipe the nozzles clean (wipe in the
proper directions).
•
Install a new ink cartridge (page 2-12).
If the right and left exit rollers are misaligned, that is, contact
printed surfaces, they can become contaminated with ink.
Use water to dampen a soft cloth and remove the ink from
the rollers.
A film and/or dust can build up on the sensors and cause
misfeeds of the material. Lift the transport door and use
compressed air to blow dust from the sensors. Cans of
compressed air are available from many computer supply
houses.
Periodically wipe the print head shaft clean with a dry, soft,
lint free, cotton cloth. DO NOT OIL! Refer to illustration on
the next page.
Printer Maintenance • 5
5-3
Advertisement
Table of Contents
