Pitney Bowes ADDRESSRIGHT DA750 Operator's Manual page 84
Pitney bowes inc. all in one printer user manual
Hide thumbs
Also See for ADDRESSRIGHT DA750:
- Quick reference manual (2 pages) ,
- Operating manual (143 pages)
Table of Contents
Advertisement
6 • Troubleshooting
Other Problems
(continued)
6-8
Problem
Shuttle Jam
Reason:
Envelope thickness knob is set too low for mate-
rial.
Solution:
Open the print area door assembly of the print-
er, and adjust the media thickness knob. See
page 3-18.
Reason:
Lower rail shaft dirty.
Solution:
Wipe lower rail shaft clean. DO NOT OIL!
Problem
Memory Card Error
Reason:
The card was removed while the printer was
reading it.
Solution:
Do not remove the card while the printer is in
use. If the card has been removed, turn the
printer off, re-insert the card, and then turn the
printer on again.
Problem
Out of Memory
Reason:
The printer can run out of memory when down-
loading fonts or graphics.
Solution:
This generally means you're trying to use a
graphic (artwork) that's too big or you have too
many fonts or too large a font size. If the out-of-
memory message appears, try reducing the size
of your art and limiting the number and size of
your fonts. Then shut the printer OFF, then ON
and retry.
SV61027 Rev. D
Advertisement
Table of Contents
