Pitney Bowes ADDRESSRIGHT DA750 Operator's Manual page 27

Getting Started with the DA700/DA750 Printer • 2
Installing and
Removing the
Ink Jet Cartridge
(continued)
SV61027 Rev. D
6. Gently insert the cartridge (color to the right, black to the
left-DA750 only) into the carriage at approximately a 20
degree angle with copper strip to the bottom and in first.
Press down on the cartridge until it is seated.
7. Push the cartridge forward (away from you) until it snaps
in place.
IMPORTANT! When installing cartridges in the DA750,
immediately perform the CMYK Printing Alignment pro-
cedure. See page 5-5 for instructions.
Removing the Ink Jet Cartridge
When you need to remove or replace the ink jet cartridges,
follow these steps:
1. With the printer on, press the ON LINE key until the dis-
play reads OFF LINE.
2. Open the printhead cover of the printer.
2-13