Set The Wire Frame Ramp - Pitney Bowes ADDRESSRIGHT DA750 Operator's Manual
Pitney bowes inc. all in one printer user manual
Hide thumbs
Also See for ADDRESSRIGHT DA750:
- Quick reference manual (2 pages) ,
- Operating manual (143 pages)
Table of Contents
Advertisement
3 • DA700/DA750 Features and Adjustments
Setting Up A Job
(continued)
3-14
4. Set the Wire Frame Ramp
Slide Ramp
Upward—Slide the
ramp to the top of
the Wire Frame.
Slide Ramp
Down—With the
Feed Gap properly
set for one piece of
media, slide the ramp
down.
Adjust Ramp to Edge
of Media —Add a stack
of media and adjust the
ramp downward until
the first piece of media
is resting half way down
the angle of the ramp
surface as pictured be-
low (one piece of media
is shown for simplicity).
NOTE: This picture is
shown without the Slid-
ing Fence, for ease of
illustration.
SV61027 Rev. D
Advertisement
Table of Contents
