2b
Connect to power & network
(Non-powered Ethernet network requires AC power adapter)
1
Upper LED lights
green to indicate
when phone is
connected and
using power.
Lower LED
lights green to
indicate adapter
has AC power.
3
Connect a network cable
to the Data / Power Out of
the adaptor. Plug the other
end into the LAN port
(orange) on the phone.
6
Connect the AC
power cable
between the
power adapter
and an electrical
socket.
2
Connect the second
network cable to the
DATA IN port on the
adapter and to an
Ethernet jack in the
workspace (or on a
data switch/router).
Optional
Share a single LAN wall
jack between your IP
phone and computer by
daisy-chaining the PC
and the phone using the
PC port (purple) on the
phone. (The phone
connects to the wall jack
and the PC connects to
the phone.)