Removal And Replacement Procedures For Authorized Service Provider Parts; Component Replacement Procedures - HP Elite x2 1012 G2 Maintenance And Service Manual

6 Removal and replacement procedures for
Authorized Service Provider parts
This chapter provides removal and replacement procedures for Authorized Service Provider only parts.
CAUTION:
Accessing these parts can damage the computer or void the warranty.
CAUTION:
perform the removal and replacement procedures described here. Accessing the internal part could damage
the computer or void the warranty.

Component replacement procedures

NOTE: Details about your computer, including model, serial number, product key, and length of warranty,
are on the service tag at the bottom of your computer. See
details.
NOTE: HP continually improves and changes product parts. For complete and current information on
supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then
follow the on-screen instructions.
There are as many as 30 screws that must be removed, replaced, and/or loosened when servicing Authorized
Service Provider only parts. Make special note of each screw size and location during removal and
replacement.
28 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Components described in this chapter should only be accessed by an authorized service provider.
This computer does not have user-replaceable parts. Only HP authorized service providers should
Locating system information on page 14 for