Battery - HP Elite x2 1012 G2 Maintenance And Service Manual

Battery

Description
Battery, 4 C, 41 WH, 2.7 Ah, LI
IMPORTANT:
replacement.
Before removing the battery, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the following components:
a. Kickstand (select products only) (see
b. Back cover (see
c. Display panel (see
Remove the battery:
1. Release the cable from the routing channels (1), and then disconnect the battery (2).
32 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Make special note of each screw and screw lock size and location during removal and
Back cover on page
Display panel on page
Kickstand on page 26)
29)
30)
Spare part number
860708-855