Dell S4048–ON Configuration Manual page 654

• Display the configuration of IPsec encryption policies on the router.
show crypto ipsec policy
Displaying OSPFv3 IPsec Security Policies
To display the configuration of IPsec authentication and encryption policies, use the following commands.
• Display the AH and ESP parameters configured in IPsec security policies, including the SPI number, key, and algorithms used.
EXEC Privilege mode
show crypto ipsec policy [name name]
• name: displays configuration details about a specified policy.
• Display security associations set up for OSPFv3 links in IPsec authentication and encryption policies on the router.
EXEC Privilege
show crypto ipsec sa ipv6 [interface interface]
To display information on the SAs used on a specific interface, enter interface interface, where interface is one of the following
values:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port[/subport] information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information.
• For a port channel interface, enter the keywords port-channel then a number.
• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
Examples of the show crypto ipsec Commands
In the first example, the keys are not encrypted (shown in bold). In the second and third examples, the keys are encrypted (shown in bold).
The following example shows the show crypto ipsec policy command.
Dell#show crypto ipsec policy
Crypto IPSec client security policy data
Policy name
Policy refcount
Inbound ESP SPI
Outbound ESP SPI
Inbound ESP Auth Key
Outbound ESP Auth Key
Inbound ESP Cipher Key
Outbound ESP Cipher Key : 123456789a123456789b123456789c123456789d12345678
Transform set
Crypto IPSec client security policy data
Policy name
Policy refcount
Inbound AH SPI
Outbound AH SPI
Inbound AH Key
Outbound AH Key
Transform set
Crypto IPSec client security policy data
Policy name
Policy refcount
Inbound ESP SPI
Outbound ESP SPI
Inbound ESP Auth Key
bbdd96e6eb4828e2e27bc3f9ff541e43faa759c9ef5706ba8ed8bb5efe91e97eb7c0c30808825fb5
654 Open Shortest Path First (OSPFv2 and OSPFv3)
: OSPFv3-1-502
: 1
: 502 (0x1F6)
: 502 (0x1F6)
: 123456789a123456789b123456789c12
: 123456789a123456789b123456789c12
: 123456789a123456789b123456789c123456789d12345678
: esp-3des esp-md5-hmac
: OSPFv3-1-500
: 2
: 500 (0x1F4)
: 500 (0x1F4)
: bbdd96e6eb4828e2e27bc3f9ff541e43faa759c9ef5706ba8ed8bb5efe91e97e
: bbdd96e6eb4828e2e27bc3f9ff541e43faa759c9ef5706ba8ed8bb5efe91e97e
: ah-md5-hmac
: OSPFv3-0-501
: 1
: 501 (0x1F5)
: 501 (0x1F5)
: