Dvd Audio/Multi Channel In Playback - Pioneer Elite VSX-47TX Operating Instructions Manual

DVD Audio/MULTI CHANNEL IN Playback

MULTI CH IN allows you to connect a DVD audio player or an external decoder to enjoy certain types of
specialized discs. To use MULTI CH playback follow the instructions below.
TV INPUT
TV CONTROL
TV VOL
TV CH
THX STANDARD
SURROUND
LISTENING
ADVANCED ADVANCED
CINEMA CONCERT
(DVD-A/SACD)
1
ACOUSTIC MULTI CH
CAL INPUT
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
AXD7290
1
• You can't use any kind of sound processing together with MULTI CH IN. Selecting a listening mode,
memo
or switching these modes, cancels the MULTI CH IN.
• If the center speaker is set to "NO" the signal for that channel is divided between the front speak-
ers. If any other speakers are set to "NO" the signal for that (those) channel(s) won't get output at
all.
• You cannot set sound features (p.50-52) on, in MULTI CH IN mode.
See MULTI CH IN SELECT (p.94) for more on MULTI CH IN
playback.
1 Press the MULTI CH IN button on the
INPUT
MIDNIGHT VOLUME
DIGITAL
NR
STEREO
MUTE
/DIRECT
MODE
LISTENING
LIGHT
CH SELECT
Î
2 Use the LISTENING CH SEL button to
2
remote control's Receiver MAIN
screen or the MULTI CH INPUT
button on the front panel.
Each press switches the input between the previous
mode and MULTI CH IN.
ON: This is a true playback of the signal from the
MULTI CH INPUT terminals, output without digital
processing. You can only control each channel level.
OFF: Cancels the MULTI CH IN modes.
select the number of input channels.
You can select 2 or 8 channels. For best sound quality
use 2 channels when you listen to stereo sources.
Basic Operation
53